iSOLde CLEO HPA Flexpower 400-600W

This HPA lamp has been used under the Philips brand in many Philips sunmobiles. Sometimes also under the name Philips Cleo HPA Flexpower 400-500W but mostly under the name Philips CLEO HPA Flexpower 400-600W. For many years now this formerly Philips product has been produced by Cosmedico under the brand name Isolde. So new name, new packaging but exactly the same lamp.

• 400 - 600 watt
• R7s fitting (clip-in)
• lenght: 118 mm
• lifetime: 800 hours

Replace your Philips CLEO HPA Flexpower 400-600W with this Isolde lamp. Also for replacing Maxlight Flexpower 400-600 in Hapro models.

Attention!!: On the internet HPA 400S is often recommended for all Philips sunmobiles but we regularly get info from the market that this lamp does not function very well or brakes down very soon. This may happen when 500W Ballasts (kind of trafo) is used in the Sunmobile. Apart from technical problems the HPA 400S also produces 20% less UV than the Flexpower 400-600 incase 500W ballast are being used.

We strongly suggest to check which type of lamp is recommended in the original instruction manual. In case you do not have that anymore you can easily download them from internet. For the below mentioned Sunmobiles we know that in the philips instruction manual the HPA Flexpower 400-600 is recommended.

Flexpower 400-600 in following products:

• Philips facial tanner HB 404 (1 pc)
• Philips facial tanner HB 400 (1 spc)
• Philips Sunmobile HB 811 (3 pcs)
• Philips Sunmobile HB 814
• Philips Sunmobile HB 822 (3 pcs)
• Philips Sunmobile HB 823
• Philips Sunmobile HB 824
• Philips Sunmobile HB 826
• Philips Sunmobile HB 828
• Philips Sunmobile HP 846
• Philips Sunmobile HB 950
• Philips Sunmobile HB 951
• Philips Sunmobile HB 952
• Philips Sunmobile HB 953
• Philips Sunmobile HB 955
• Philips Sunmobile HB 971 (4 pcs)
• Philips Sunmobile HB 975 (4 pcs)
• Philips Sunmobile HB 977 (4 pcs)
• Philips Sunmobile HP 3701
• Philips Sunmobile HB 8540 (3 pcs)

These productnames can be found on the product or on the rating label mostly close to the exit of the powercord otherwise on the housing on the side or bottom.

You need Philips HPA 400 - 500 ?

For below mentioned Philips products you officially need the HPA Flexpower 400-500W. This type of lamp has been discontinued and the Flexpower HPA 400 - 500 should be replaced by the HPA Flexpower 400-600 lamp. You can use this lamp in the following devices:

• Philips Sunmobile HB 812
• Philips Sunmobile HB 821
• Philips Sunmobile HB 851 (4 pcs)
• Philips Sunmobile HB 861
• Philips Sunmobile HB 871
• Philips Sunmobile HB 875